๐๏ธ Can 3D printing and conventional steel manufacturing be combined to develop more efficient structural components?
A new study published in ๐๐ผ๐ป๐๐๐ฟ๐๐ฐ๐๐ถ๐ผ๐ป ๐ฎ๐ป๐ฑ ๐๐๐ถ๐น๐ฑ๐ถ๐ป๐ด ๐ ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ investigates ๐ต๐๐ฏ๐ฟ๐ถ๐ฑ ๐๐๐ฒ๐ฒ๐น ๐ฐ๐ผ๐บ๐ฝ๐ผ๐ป๐ฒ๐ป๐๐ combining hot-rolled steel and ๐ช๐ถ๐ฟ๐ฒ ๐๐ฟ๐ฐ ๐๐ฑ๐ฑ๐ถ๐๐ถ๐๐ฒ ๐ ๐ฎ๐ป๐๐ณ๐ฎ๐ฐ๐๐๐ฟ๐ถ๐ป๐ด (๐ช๐๐๐ ). Through experimental and numerical analyses, the research demonstrates the potential of this approach for ๐บ๐ผ๐ฟ๐ฒ ๐ฒ๐ณ๐ณ๐ถ๐ฐ๐ถ๐ฒ๐ป๐ ๐ฎ๐ป๐ฑ ๐ผ๐ฝ๐๐ถ๐บ๐ถ๐๐ฒ๐ฑ ๐๐๐ฒ๐ฒ๐น ๐๐๐ฟ๐๐ฐ๐๐๐ฟ๐ฒ๐.
๐ Mechanical and metallurgical characterization of hybrid carbon steel combining hot-rolled and WAAM ๐ Construction and Building Materials ๐จโ๐ฌ Kaike Monteiro, Carlos Zhu, David Andrade, Ricardo Branco, Luรญs Simรตes da Silva and Trayana Tankova. ๐ buff.ly/qWpClbw
We are proud to announce that ๐๐ข๐ฏ๐ ๐๐๐๐๐ ๐ซ๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌ have been recognised in the ๐๐๐๐ ๐๐๐ข๐ญ๐ข๐จ๐ง of the World's Top 2% Scientists list, developed by researchers at Stanford University and published through Elsevier.
๐ Congratulations to our researchers! ๐น ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐จ๐ข๐ฆ๐๐ซ๐ โข Prof. Luรญs Simรตes da Silva โข Rohola Rahnavard ๐น ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐ข๐ง๐ก๐จ โข Prof. Paulo B. Lourenรงo โข Prof. Joaquim Barros โข Shaghayegh Karimzadeh
๐ This international recognition highlights the ๐ฌ๐๐ข๐๐ง๐ญ๐ข๐๐ข๐ ๐ข๐ฆ๐ฉ๐๐๐ญ ๐๐ง๐ ๐ ๐ฅ๐จ๐๐๐ฅ ๐ฏ๐ข๐ฌ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒ of research carried out at ISISE. Several of our colleagues have also been recognised in previous editions, reflecting their sustained contributions to the international scientific community.
We warmly congratulate all five researchers on this achievement! ๐ ๐ Full list: buff.ly/ZRqHUBW
ISISE researchers ๐๐น๐ฒ๐ ๐ฎ๐ป๐ฑ๐ฟ๐ฒ ๐ฅ๐ผ๐ฐ๐ต๐ฎ and Isabel B. Valente, together with Josรฉ B. Aguiar (CTAC), have published a new open-access article in Surfaces and Interfaces (Elsevier):
Galvanised cold-formed steel (CFS) shows great potential for adhesively bonded structural joints, but how does the zinc coating itself affect bond performance? The study compared continuously and batch hot-dip galvanised substrates under three surface conditions and two structural epoxy adhesives, combining surface characterisation (coating thickness, roughness and surface free energy) with single-lap shear testing.
๐ ๐๐ฒ๐ ๐ณ๐ถ๐ป๐ฑ๐ถ๐ป๐ด๐: โข Mechanical abrasion was the dominant factor, raising peak shear strength by 25 to 114% and reducing scatter. โข A roughly fourfold thicker zinc coating did not, on its own, change joint strength. Under abrasion, however, the batch galvanised coating was more prone to detachment, shifting failure into the zinc layer. โข Primed joints failed prematurely at the steelโprimer interlayer, with up to 60% lower strength.
๐ก Takeaway: surface quality control for bonded galvanised steel should go beyond roughness and wettability, and also consider the mechanical integrity of the zinc layer.
๐ฒ Can microwave technology help develop stronger and more durable wood-polymer composites? A new study published in the ๐๐ผ๐๐ฟ๐ป๐ฎ๐น ๐ผ๐ณ ๐ ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ ๐ฅ๐ฒ๐๐ฒ๐ฎ๐ฟ๐ฐ๐ต ๐ฎ๐ป๐ฑ ๐ง๐ฒ๐ฐ๐ต๐ป๐ผ๐น๐ผ๐ด๐ explores the combination of ๐บ๐ถ๐ฐ๐ฟ๐ผ๐๐ฎ๐๐ฒ ๐ฝ๐ฟ๐ฒ๐๐ฟ๐ฒ๐ฎ๐๐บ๐ฒ๐ป๐ and ๐ถ๐ป ๐๐ถ๐๐ ๐ฝ๐ผ๐น๐๐บ๐ฒ๐ฟ๐ถ๐๐ฎ๐๐ถ๐ผ๐ป to enhance maritime pine properties. The combined treatment improved dimensional stability and increased ๐ฏ๐ฒ๐ป๐ฑ๐ถ๐ป๐ด ๐๐๐ฟ๐ฒ๐ป๐ด๐๐ต ๐ฏ๐ ๐ฎ๐ฏ% and ๐๐๐ถ๐ณ๐ณ๐ป๐ฒ๐๐ ๐ฏ๐ ๐ญ๐ฐ%, demonstrating its potential for ๐ต๐ถ๐ด๐ต-๐ฝ๐ฒ๐ฟ๐ณ๐ผ๐ฟ๐บ๐ฎ๐ป๐ฐ๐ฒ ๐๐ผ๐ผ๐ฑ ๐ฐ๐ผ๐บ๐ฝ๐ผ๐๐ถ๐๐ฒ๐.
๐ ๐ง๐ถ๐๐น๐ฒ: Microstructural engineering of maritime pine by microwave pretreatment and in situ polymerization with methyl methacrylate to improve composite structure and performance ๐ ๐๐ผ๐๐ฟ๐ป๐ฎ๐น: Journal of Materials Research and Technology ๐จโ๐ฌ Fernando Jรบnior Resende Mascarenhas, Rogรฉrio Manuel Santos Simรตes, Andrรฉ Luis Christoforo, Alfredo Manuel Pereira Geraldes Dias, Andrรฉ Eduardo Palos Cunha and Sergio Neves Monteiro. ๐ ๐๐ข๐: buff.ly/Ql1qdhn
๐ณ Can microwave treatment improve wood durability without compromising its mechanical performance?
A new study published in ๐๐ป๐๐ฒ๐ฟ๐ป๐ฎ๐๐ถ๐ผ๐ป๐ฎ๐น ๐๐ถ๐ผ๐ฑ๐ฒ๐๐ฒ๐ฟ๐ถ๐ผ๐ฟ๐ฎ๐๐ถ๐ผ๐ป & ๐๐ถ๐ผ๐ฑ๐ฒ๐ด๐ฟ๐ฎ๐ฑ๐ฎ๐๐ถ๐ผ๐ป investigates the effects of ๐บ๐ถ๐ฐ๐ฟ๐ผ๐๐ฎ๐๐ฒ ๐๐ฟ๐ฒ๐ฎ๐๐บ๐ฒ๐ป๐ on the biological durability and mechanical properties of Eucalyptus globulus heartwood.
The results show that microwave pretreatment can significantly enhance ๐ฝ๐ฟ๐ฒ๐๐ฒ๐ฟ๐๐ฎ๐๐ถ๐๐ฒ ๐๐ฝ๐๐ฎ๐ธ๐ฒ ๐ฎ๐ป๐ฑ ๐ฟ๐ฒ๐๐ถ๐๐๐ฎ๐ป๐ฐ๐ฒ ๐๐ผ ๐ณ๐๐ป๐ด๐ฎ๐น ๐ฑ๐ฒ๐ฐ๐ฎ๐, while mild treatments preserve bending strength and stiffness, highlighting its potential for ๐๐๐๐๐ฎ๐ถ๐ป๐ฎ๐ฏ๐น๐ฒ ๐๐ถ๐บ๐ฏ๐ฒ๐ฟ ๐ฐ๐ผ๐ป๐๐๐ฟ๐๐ฐ๐๐ถ๐ผ๐ป.
๐ ๐ง๐ถ๐๐น๐ฒ: Influence of microwave treatment on fungal decay, preservative performance, and mechanical integrity of Eucalyptus globulus heartwood ๐ ๐๐ผ๐๐ฟ๐ป๐ฎ๐น: International Biodeterioration & Biodegradation ๐จโ๐ฌ Fernando Jรบnior Resende Mascarenhas, Juarez Benigno Paes, Alfredo Manuel Pereira Geraldes Dias, Andrรฉ Luis Christoforo, Rogรฉrio Manuel Santos Simรตes, Flรกvia Maria Silva Brito, Glaucileide Ferreira and Rodolpho Stephan Santos Braga. ๐ ๐๐ข๐: buff.ly/StTXLoT
Researchers from the ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ ๐ฎ๐ป๐ฑ ๐ฉ๐ถ๐ฏ๐ฟ๐ฎ๐๐ถ๐ผ๐ป๐ ๐๐น๐๐๐๐ฒ๐ฟ of ๐๐ฆ๐๐ฆ๐ โ University of Coimbra participated in ๐ง๐ฒ๐ฐ๐ป๐ถ๐ฎ๐ฐ๐ฬ๐๐๐ถ๐ฐ๐ฎ ๐ฎ๐ฌ๐ฎ๐ฒ, held in Granada, Spain, from ๐ฎ๐ญ ๐๐ผ ๐ฎ๐ฏ ๐ข๐ฐ๐๐ผ๐ฏ๐ฒ๐ฟ.
The congress brought together researchers, professionals and industry representatives, providing an excellent opportunity to exchange knowledge and discuss recent advances in acoustics and vibrations.
๐ฌ ISISE researchers presented work covering a wide range of topics: ๐น ๐๐๐ถ๐น๐ฑ๐ถ๐ป๐ด ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ โ Acoustic performance of modular floors, impact sound mitigation, and optimisation of ventilation systems considering acoustic, energy and indoor air quality requirements. ๐น ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ ๐ ๐ฒ๐๐ฎ๐บ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ โ Development and numerical modelling of acoustic metamaterials, resonant metastructures and Helmholtz resonators. ๐น ๐ฆ๐ผ๐๐ป๐ฑ๐๐ฐ๐ฎ๐ฝ๐ฒ๐ โ Soundscape analysis and its integration into conservation planning for natural areas and heritage sites. ๐น ๐ฉ๐ถ๐ฏ๐ฟ๐ผ๐ฎ๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ โ Acoustic comfort in metro stations and prediction of railway traffic-induced vibrations.
๐ ISISE was well represented by Luis Godinho, Paulo Amado Mendes, Diogo Mateus, Andreia Pereira, Pedram Ayobi, Marco Ribera, Henrique Ferreira, Luciana Oliveira, Liliana Carvalho, Rocco Scarano and Dhanuskha Jayawardana.
Congratulations to all researchers for their contributions and for representing ISISE at this international scientific event!
Researchers Rohola Rahnavard, Sandra Jordรฃo and Eliana Inca Cabrera, attended glasstec โ International Trade Fair 2026 in Dรผsseldorf, Germany, one of the leading international events for the #glassindustry.
๐๏ธ The participation in #glasstec2026 provided an opportunity to explore the latest developments in #structuralglass, #facade ๐ฌ๐ฒ๐ฌ๐ญ๐๐ฆ๐ฌ, ๐ ๐ฅ๐๐ฌ๐ฌ ๐ฉ๐ซ๐จ๐๐ฎ๐๐ญ๐ข๐จ๐ง ๐๐ง๐ ๐ฉ๐ซ๐จ๐๐๐ฌ๐ฌ๐ข๐ง๐ ๐ญ๐๐๐ก๐ง๐จ๐ฅ๐จ๐ ๐ข๐๐ฌ, while engaging directly with manufacturers, engineering companies, testing organisations and other stakeholders from across the international glass and faรงade sector ๐ค to strengthen links between research and industry and exchange perspectives on current engineering challenges in structural glass and faรงade engineering.
โ๏ธ This study investigates the ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐จ๐ฉ๐ญ๐ข๐ฆ๐ข๐ฌ๐๐ญ๐ข๐จ๐ง of ๐๐จ๐ฅ๐-๐๐จ๐ซ๐ฆ๐๐ ๐ฌ๐ญ๐๐๐ฅ ๐ญ๐ซ๐ฎ๐ฌ๐ฌ-๐ ๐ข๐ซ๐๐๐ซ๐ฌ developed within the ๐๐๐๐๐๐๐๐๐๐๐๐ modular construction system. By refining the truss geometry and connection details, the research explores solutions to improve ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐, ๐ฆ๐๐ญ๐๐ซ๐ข๐๐ฅ ๐๐๐๐ข๐๐ข๐๐ง๐๐ฒ ๐๐ง๐ ๐๐๐๐ซ๐ข๐๐๐ญ๐ข๐จ๐ง ๐ฌ๐ข๐ฆ๐ฉ๐ฅ๐ข๐๐ข๐ญ๐ฒ. Numerical analyses and comparisons with conventional IPE beams demonstrate the potential of the optimised configurations for developing ๐ฅ๐ข๐ ๐ก๐ญ๐ฐ๐๐ข๐ ๐ก๐ญ ๐๐ง๐ ๐๐๐๐ข๐๐ข๐๐ง๐ญ ๐ฆ๐จ๐๐ฎ๐ฅ๐๐ซ ๐ฌ๐ญ๐๐๐ฅ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฌ.
๐ Design and structural performance optimization of a lipped-channel cold-formed steel truss-girder used in INNO3DJOINTS modular construction system ๐จโ๐ฌ Authors: Nemanja Milovanoviฤ, Rui Simรตes and Luรญs Simรตes da Silva ๐ Structures ๐ buff.ly/IPHdjBb
๐ Call for Expressions of Interest | MODULINK Research Opportunity
We are looking for a motivated researcher with an MSc degree in Civil Engineering, Structural Engineering, or a related field to potentially join MODULINK โ Advanced Inter-Module Connections for High-Performance and Reconfigurable Steel Modular Buildings. MODULINK is a research project focused on the development of a new generation of adjustable and reversible inter-module connections for steel modular construction, aiming to improve structural performance while facilitating manufacturing, assembly, accommodation of construction tolerances, future disassembly and reuse.
The research will combine several complementary areas, including: โข development and optimisation of steel inter-module connection systems; โข experimental testing and mechanical characterisation of connections; โข detailed numerical/finite element modelling and model calibration; โข development of simplified connection models for use in global structural analyses; โข assessment of diaphragm behaviour and global structural response of modular buildings; โข evaluation of floor vibration serviceability and structural dynamics; โข development of practical recommendations for design, manufacturing, assembly and disassembly.
We are particularly interested in candidates with a strong interest in steel structures, computational mechanics, finite element modelling and/or experimental structural engineering. Previous experience in all these areas is not required.
The opportunity may be particularly suitable for someone interested in developing the research towards a PhD. Such an interest would be highly valued.
๐ฉ Interested in joining MODULINK? Please submit your expression of interest through the following form: buff.ly/t0sA3N5
Please submit your interest before November 6th, 2026.
Please feel free to share this opportunity with MSc graduates or young researchers who may be interested.
As part of the R&D project โ MODULINK โ Advanced Inter-Module Connections for High-Performance and Reconfigurable Steel Modular Buildingsโ, the recruitment of one (1) research grant is planned t...
On ๐ณโ๐ด ๐ข๐ฐ๐๐ผ๐ฏ๐ฒ๐ฟ ๐ฎ๐ฌ๐ฎ๐ฒ, the kick-off meeting of the European research project ๐ฆ๐ง๐๐ฅ๐ฉ๐๐ฉ๐ โ Enhancing the Fatigue Life of Advanced High-Strength Steel and Hybrid Structures through Friction Stir Welding took place at the University of Stuttgart, Germany.
Funded by the European Union under the ๐ฅ๐ฒ๐๐ฒ๐ฎ๐ฟ๐ฐ๐ต ๐๐๐ป๐ฑ ๐ณ๐ผ๐ฟ ๐๐ผ๐ฎ๐น ๐ฎ๐ป๐ฑ ๐ฆ๐๐ฒ๐ฒ๐น (๐ฅ๐๐๐ฆ), STIRVIVE aims to advance ๐๐ฟ๐ถ๐ฐ๐๐ถ๐ผ๐ป ๐ฆ๐๐ถ๐ฟ ๐ช๐ฒ๐น๐ฑ๐ถ๐ป๐ด (๐๐ฆ๐ช) technologies to improve the fatigue performance, durability and sustainability of high-strength steel structures and hybrid aluminiumโsteel joints.
Over the next ๐ฐ๐ฎ ๐บ๐ผ๐ป๐๐ต๐, the project will focus on developing advanced welding tools and processes, improving the fatigue resistance of welded joints, and enabling the industrial application of FSW technologies in sectors such as steel construction, shipbuilding and heavy engineering.
๐ฌ The ๐จ๐ป๐ถ๐๐ฒ๐ฟ๐๐ถ๐๐ ๐ผ๐ณ ๐๐ผ๐ถ๐บ๐ฏ๐ฟ๐ฎ, through researchers from ๐๐ฆ๐๐ฆ๐ โ Institute for Sustainability and Innovation in Structural Engineering, plays an active role in the project, leading research activities related to ๐ฎ๐ฑ๐๐ฎ๐ป๐ฐ๐ฒ๐ฑ ๐๐ฆ๐ช ๐๐ผ๐ผ๐น๐ถ๐ป๐ด, ๐ฒ๐ ๐ฝ๐ฒ๐ฟ๐ถ๐บ๐ฒ๐ป๐๐ฎ๐น ๐ณ๐ฎ๐๐ถ๐ด๐๐ฒ ๐ฐ๐ต๐ฎ๐ฟ๐ฎ๐ฐ๐๐ฒ๐ฟ๐ถ๐๐ฎ๐๐ถ๐ผ๐ป ๐ฎ๐ป๐ฑ ๐๐๐๐๐ฎ๐ถ๐ป๐ฎ๐ฏ๐ถ๐น๐ถ๐๐ ๐ฎ๐๐๐ฒ๐๐๐บ๐ฒ๐ป๐, in collaboration with researchers from ๐๐๐ ๐ ๐ฃ๐ฅ๐.
The STIRVIVE consortium brings together ๐ณ๐ผ๐๐ฟ ๐๐๐ฟ๐ผ๐ฝ๐ฒ๐ฎ๐ป ๐ฝ๐ฎ๐ฟ๐๐ป๐ฒ๐ฟ๐: University of Stuttgart (Germany), University of Coimbra (Portugal), SEAPOWER (Portugal) and TRA-C (France), combining scientific expertise and industrial capabilities to develop innovative and more sustainable joining solutions.
We look forward to contributing to this exciting European collaboration and advancing the next generation of high-performance steel and hybrid structures!
๐ฆ๐ง๐๐ฅ๐ฉ๐๐ฉ๐ (Grant Agreement No. 101296125) is co-funded by the European Union through the Research Fund for Coal and Steel (RFCS).
The School of Engineering regularly welcomes leading international professors and researchers, bringing fresh ideas, experiences, and perspectives. As part of these visits, โEngineering Talksโ are promoted and open to the community, creating unique opportunities to engage with cutting-edge knowledge and international networks.
NEXT TALK: Narges Azadvar Marie Skลodowska-Curie Postdoctoral Fellow, School of Mechanical, Aerospace and Civil Engineering, University of Sheffield (UK)
19 October 2026, 11h00 Azurรฉm Campus, Building 1 | Room 2.009 (Sala de Reuniรตes 1 DEC) Title: Composite Strengthening of Existing Structures: From FRP and TRM Seismic Retrofitting to Low-Carbon Textile-Mortar Systems Info: Strengthening and rehabilitation of existing structures are increasingly important for improving seismic resilience and extending the service life of the built environment. This seminar traces a research journey from conventional fibre-reinforced polymer (FRP) systems to textile-reinforced mortar/concrete (TRM/TRC) and, more recently, low-carbon inorganic-matrix composites. It covers experimental and numerical studies on FRP- and TRC-strengthened reinforced-concrete columns under axial and cyclic loading, and on TRM-strengthened masonry walls under combined seismic actions. The final part introduces the ongoing Marie Skลodowska-Curie project STRENGTH (University of Sheffield), which is developing AR-glass textile-reinforced geopolymer mortar as a low-carbon strengthening solution, with a focus on textile-mortar bond behaviour and interface modelling. The session closes with open technical questions and opportunities for collaboration. Dr Narges Azadvar is a Marie Skลodowska-Curie Postdoctoral Fellow at the University of Sheffield, specialising in advanced composite systems and low-carbon materials for structural strengthening. She holds a PhD in Structural Engineering (2021) and has worked on more than 20 academic and industry-supported projects in structural rehabilitation, cementitious composites and finite-element modelling. She has published on FRP/TRC-strengthened concrete columns and TRM-strengthened masonry walls, co-authored two book chapters and developed a patented strengthening system. Her current MSCA project, STRENGTH, focuses on AR-glass textile-reinforced geopolymer mortar for low-carbon strengthening of substandard structures.
Organiser/Promoter: Pier Giovanni Benzo, investigador de pรณs-doutoramento (projeto CirWind, coord. Prof. Josรฉ Sena-Cruz), Departamento de Engenharia Civil
Partnership: Departamento de Engenharia Civil / ISISE-Institute for Sustainability and Innovation in Structural Engineering ... See MoreSee Less
โ๏ธ Predicting ๐ฆ๐๐๐ก๐๐ง๐ข๐๐๐ฅ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐ as a component is built.
A new study in ๐๐ก๐ข๐ง-๐๐๐ฅ๐ฅ๐๐ ๐๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฌ links ๐๐จ๐จ๐ฅ๐ข๐ง๐ ๐ก๐ข๐ฌ๐ญ๐จ๐ซ๐ฒ to ๐ฌ๐ญ๐ซ๐๐ฌ๐ฌโ๐ฌ๐ญ๐ซ๐๐ข๐ง ๐๐๐ก๐๐ฏ๐ข๐จ๐ฎ๐ซ and ๐ฌ๐ฉ๐๐ญ๐ข๐๐ฅ ๐ฏ๐๐ซ๐ข๐๐ญ๐ข๐จ๐ง๐ฌ in mechanical properties within ๐๐๐-๐๐ซ๐ ๐๐๐ซ๐๐จ๐ง ๐ฌ๐ญ๐๐๐ฅ ๐๐จ๐ฆ๐ฉ๐จ๐ง๐๐ง๐ญ๐ฌ.
๐ฅ The animation reveals the predicted ๐ฌ๐ญ๐ซ๐๐ง๐ ๐ญ๐ก ๐๐ข๐ฌ๐ญ๐ซ๐ข๐๐ฎ๐ญ๐ข๐จ๐ง throughout the volume, connecting ๐๐๐ฉ๐จ๐ฌ๐ข๐ญ๐ข๐จ๐ง ๐ฌ๐ญ๐ซ๐๐ญ๐๐ ๐ฒ with ๐๐จ๐ฆ๐ฉ๐จ๐ง๐๐ง๐ญ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐.
๐ฌ ISISE at the European Researchersโ Night 2026!
Last September, ISISE took part in the European Researchersโ Night โ Noite Europeia dos Investigadores 2026, held at Forum Braga.
It was a great opportunity to bring research closer to the public and, in particular, to younger audiences, through interactive demonstrations, hands-on activities and conversations with our researchers.
Visitors had the chance to discover some of the work being developed at ISISE in areas related to structural engineering, sustainability, digital technologies, innovative materials and the built environment, showing how research can contribute to safer, more sustainable and more resilient communities.
A big thank you to everyone from ISISE who contributed to preparing and running the activities, and to all those who stopped by, asked questions, experimented and shared their curiosity with us!
Events such as the European Researchersโ Night are an important opportunity to open the doors of research to society and inspire the next generation of scientists and engineers. ๐๐๏ธ๐ฌ
On 25 September, ISISE participated in the ๐๐ฎ๐ซ๐จ๐ฉ๐๐๐ง ๐๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌโ ๐๐ข๐ ๐ก๐ญ ๐๐๐๐, held in downtown Coimbra, with the stand:
Throughout the event, visitors had the opportunity to explore interactive activities and demonstrations related to the research developed at ISISE, including:
๐จ๏ธ ๐๐ซ๐ข๐ง๐ญ๐ข๐ง๐ ๐ญ๐ก๐ ๐๐ฎ๐ญ๐ฎ๐ซ๐ โ discovering how polymer and steel 3D printing can transform the manufacturing of materials and construction solutions. ๐ถ ๐๐ก๐ ๐๐๐ง๐๐ ๐จ๐ ๐ซ๐๐ฌ๐จ๐ง๐๐ง๐๐ โ exploring vibration, sound and science through fine granular material placed on a vibrating metal plate. ๐๏ธ ๐๐๐ข๐ฌ๐ฆ๐ข๐ ๐๐ก๐๐ฅ๐ฅ๐๐ง๐ ๐ โ building small structures with wooden sticks and marshmallows and testing their behaviour on a shake table. โป๏ธ ๐๐ฎ๐ข๐ฅ๐โฆ ๐๐ ๐๐ข๐ง! โ showing how beams and columns can be reused to create new buildings, contributing to more sustainable construction, within the scope of the C4C project.
The stand also included educational videos and research projects developed at ISISE, bringing structural engineering, sustainability and innovation closer to the public.
A big thank you to everyone who visited our stand and to all ISISE members involved in preparing and supporting the activities throughout the event.
Researchers from ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐จ๐ข๐ฆ๐๐ซ๐ participated in the ๐๐๐๐ ๐๐จ๐ง๐ ๐ซ๐๐ฌ๐ฌ ๐๐๐๐, held in Zlatibor, Serbia, from 23 to 25 September.
The event provided an excellent platform for scientific exchange on recent advances in ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐๐ง๐ ๐ข๐ง๐๐๐ซ๐ข๐ง๐ , bringing together researchers, practitioners and industry representatives.
ISISE was represented through contributions by ๐ ๐ข๐ฅ๐ข๐ฉ ๐๐ฃ๐ฎ๐๐ข๐ง๐ค๐จ๐ฏ๐ขฤ, ๐๐๐๐ ๐๐๐ง๐ค๐จ๐ฏ๐ขฤ, ๐๐ฅ๐๐ค๐ฌ๐๐ง๐๐ซ๐ ๐๐ข๐ฆ๐จ๐ฏ๐ขฤ, ๐๐ฅ๐๐ค๐ฌ๐ ๐๐ข๐ฅ๐ขฤ๐๐ฏ๐ขฤ, ๐๐ฆ๐ข๐ง๐ ๐๐๐ฃ๐๐๐ซ๐๐ฏ๐ขฤ and ๐๐ฎรญ๐ฌ ๐๐ข๐ฆรต๐๐ฌ ๐๐ ๐๐ข๐ฅ๐ฏ๐, who delivered a keynote lecture on ๐ฌ๐ญ๐๐๐ฅ ๐๐จ๐ง๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ข๐จ๐ง, ๐ซ๐๐ฌ๐๐๐ซ๐๐ก ๐๐ง๐ ๐ข๐ง๐ง๐จ๐ฏ๐๐ญ๐ข๐จ๐ง ๐๐จ๐ซ ๐ ๐ฌ๐ฎ๐ฌ๐ญ๐๐ข๐ง๐๐๐ฅ๐ ๐๐ฎ๐ญ๐ฎ๐ซ๐.
The presented research addressed topics including ๐๐ข๐ซ๐๐ฎ๐ฅ๐๐ซ ๐๐จ๐ง๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ข๐จ๐ง, ๐ซ๐๐ฎ๐ฌ๐๐๐ฅ๐ ๐๐ง๐ ๐๐๐ฆ๐จ๐ฎ๐ง๐ญ๐๐๐ฅ๐ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐ฌ๐ฒ๐ฌ๐ญ๐๐ฆ๐ฌ, ๐ฌ๐ญ๐๐๐ฅ ๐ฃ๐จ๐ข๐ง๐ญ๐ฌ ๐๐ง๐ ๐๐จ๐ง๐ง๐๐๐ญ๐ข๐จ๐ง๐ฌ, and ๐ฆ๐๐๐ก๐ข๐ง๐ ๐ฅ๐๐๐ซ๐ง๐ข๐ง๐ ๐๐ฉ๐ฉ๐ซ๐จ๐๐๐ก๐๐ฌ ๐๐จ๐ซ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐๐๐ฌ๐ข๐ ๐ง.
๐ ๐ก๐๐ช ๐ฃ๐๐ฃ๐๐ฅ ๐
๐๏ธ Can 3D printing and conventional steel manufacturing be combined to develop more efficient structural components?
A new study published in ๐๐ผ๐ป๐๐๐ฟ๐๐ฐ๐๐ถ๐ผ๐ป ๐ฎ๐ป๐ฑ ๐๐๐ถ๐น๐ฑ๐ถ๐ป๐ด ๐ ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ investigates ๐ต๐๐ฏ๐ฟ๐ถ๐ฑ ๐๐๐ฒ๐ฒ๐น ๐ฐ๐ผ๐บ๐ฝ๐ผ๐ป๐ฒ๐ป๐๐ combining hot-rolled steel and ๐ช๐ถ๐ฟ๐ฒ ๐๐ฟ๐ฐ ๐๐ฑ๐ฑ๐ถ๐๐ถ๐๐ฒ ๐ ๐ฎ๐ป๐๐ณ๐ฎ๐ฐ๐๐๐ฟ๐ถ๐ป๐ด (๐ช๐๐๐ ).
Through experimental and numerical analyses, the research demonstrates the potential of this approach for ๐บ๐ผ๐ฟ๐ฒ ๐ฒ๐ณ๐ณ๐ถ๐ฐ๐ถ๐ฒ๐ป๐ ๐ฎ๐ป๐ฑ ๐ผ๐ฝ๐๐ถ๐บ๐ถ๐๐ฒ๐ฑ ๐๐๐ฒ๐ฒ๐น ๐๐๐ฟ๐๐ฐ๐๐๐ฟ๐ฒ๐.
๐ Mechanical and metallurgical characterization of hybrid carbon steel combining hot-rolled and WAAM
๐ Construction and Building Materials
๐จโ๐ฌ Kaike Monteiro, Carlos Zhu, David Andrade, Ricardo Branco, Luรญs Simรตes da Silva and Trayana Tankova.
๐ buff.ly/qWpClbw
Research developed within the ๐๐๐ ๐๐ฎ๐ project, funded by the EU through the Research Fund for Coal and Steel (RFCS).
#ISISE #ucoimbra #Dec #steelstructures #WAAM #additivemanufacturing #RFCS ... See MoreSee Less
0 CommentsComment on Facebook
๐ ๐๐๐๐๐ ๐๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌ ๐๐ฆ๐จ๐ง๐ ๐ญ๐ก๐ ๐๐จ๐ซ๐ฅ๐โ๐ฌ ๐๐จ๐ฉ ๐% ๐๐จ๐ฌ๐ญ-๐๐ข๐ญ๐๐ ๐๐๐ข๐๐ง๐ญ๐ข๐ฌ๐ญ๐ฌ!
We are proud to announce that ๐๐ข๐ฏ๐ ๐๐๐๐๐ ๐ซ๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌ have been recognised in the ๐๐๐๐ ๐๐๐ข๐ญ๐ข๐จ๐ง of the World's Top 2% Scientists list, developed by researchers at Stanford University and published through Elsevier.
๐ Congratulations to our researchers!
๐น ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐จ๐ข๐ฆ๐๐ซ๐
โข Prof. Luรญs Simรตes da Silva
โข Rohola Rahnavard
๐น ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐ข๐ง๐ก๐จ
โข Prof. Paulo B. Lourenรงo
โข Prof. Joaquim Barros
โข Shaghayegh Karimzadeh
๐ This international recognition highlights the ๐ฌ๐๐ข๐๐ง๐ญ๐ข๐๐ข๐ ๐ข๐ฆ๐ฉ๐๐๐ญ ๐๐ง๐ ๐ ๐ฅ๐จ๐๐๐ฅ ๐ฏ๐ข๐ฌ๐ข๐๐ข๐ฅ๐ข๐ญ๐ฒ of research carried out at ISISE. Several of our colleagues have also been recognised in previous editions, reflecting their sustained contributions to the international scientific community.
We warmly congratulate all five researchers on this achievement! ๐
๐ Full list: buff.ly/ZRqHUBW
#ISISE #UCoimbra #UMinho #Top2PercentScientists #StanfordElsevier #StructuralEngineering #CivilEngineering #ResearchImpact #ScientificExcellence #Research ... See MoreSee Less
0 CommentsComment on Facebook
๐ข ๐ก๐ฒ๐ ๐ฝ๐ฎ๐ฝ๐ฒ๐ฟ ๐ฝ๐๐ฏ๐น๐ถ๐๐ต๐ฒ๐ฑ!
ISISE researchers ๐๐น๐ฒ๐ ๐ฎ๐ป๐ฑ๐ฟ๐ฒ ๐ฅ๐ผ๐ฐ๐ต๐ฎ and Isabel B. Valente, together with Josรฉ B. Aguiar (CTAC), have published a new open-access article in Surfaces and Interfaces (Elsevier):
๐ฌ"๐๐ป๐ณ๐น๐๐ฒ๐ป๐ฐ๐ฒ ๐ผ๐ณ ๐๐ถ๐ป๐ฐ ๐ฐ๐ผ๐ฎ๐๐ถ๐ป๐ด ๐ฝ๐ฟ๐ผ๐ฝ๐ฒ๐ฟ๐๐ถ๐ฒ๐ ๐ผ๐ป ๐๐ต๐ฒ ๐ฝ๐ฒ๐ฟ๐ณ๐ผ๐ฟ๐บ๐ฎ๐ป๐ฐ๐ฒ ๐ผ๐ณ ๐ฎ๐ฑ๐ต๐ฒ๐๐ถ๐๐ฒ๐น๐ ๐ฏ๐ผ๐ป๐ฑ๐ฒ๐ฑ ๐ด๐ฎ๐น๐๐ฎ๐ป๐ถ๐๐ฒ๐ฑ ๐๐๐ฆ ๐ท๐ผ๐ถ๐ป๐๐"
Galvanised cold-formed steel (CFS) shows great potential for adhesively bonded structural joints, but how does the zinc coating itself affect bond performance? The study compared continuously and batch hot-dip galvanised substrates under three surface conditions and two structural epoxy adhesives, combining surface characterisation (coating thickness, roughness and surface free energy) with single-lap shear testing.
๐ ๐๐ฒ๐ ๐ณ๐ถ๐ป๐ฑ๐ถ๐ป๐ด๐:
โข Mechanical abrasion was the dominant factor, raising peak shear strength by 25 to 114% and reducing scatter.
โข A roughly fourfold thicker zinc coating did not, on its own, change joint strength. Under abrasion, however, the batch galvanised coating was more prone to detachment, shifting failure into the zinc layer.
โข Primed joints failed prematurely at the steelโprimer interlayer, with up to 60% lower strength.
๐ก Takeaway: surface quality control for bonded galvanised steel should go beyond roughness and wettability, and also consider the mechanical integrity of the zinc layer.
๐ Full article (open access): buff.ly/ch69GQi
#ISISE #SC #FRP #UMinho #StructuralEngineering #AdhesiveBonding #GalvanisedSteel #ColdFormedSteel #SurfaceEngineering #OpenAccess ... See MoreSee Less
0 CommentsComment on Facebook
๐ ๐ก๐๐ช ๐ฃ๐๐ฃ๐๐ฅ ๐
๐ฒ Can microwave technology help develop stronger and more durable wood-polymer composites?
A new study published in the ๐๐ผ๐๐ฟ๐ป๐ฎ๐น ๐ผ๐ณ ๐ ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ ๐ฅ๐ฒ๐๐ฒ๐ฎ๐ฟ๐ฐ๐ต ๐ฎ๐ป๐ฑ ๐ง๐ฒ๐ฐ๐ต๐ป๐ผ๐น๐ผ๐ด๐ explores the combination of ๐บ๐ถ๐ฐ๐ฟ๐ผ๐๐ฎ๐๐ฒ ๐ฝ๐ฟ๐ฒ๐๐ฟ๐ฒ๐ฎ๐๐บ๐ฒ๐ป๐ and ๐ถ๐ป ๐๐ถ๐๐ ๐ฝ๐ผ๐น๐๐บ๐ฒ๐ฟ๐ถ๐๐ฎ๐๐ถ๐ผ๐ป to enhance maritime pine properties.
The combined treatment improved dimensional stability and increased ๐ฏ๐ฒ๐ป๐ฑ๐ถ๐ป๐ด ๐๐๐ฟ๐ฒ๐ป๐ด๐๐ต ๐ฏ๐ ๐ฎ๐ฏ% and ๐๐๐ถ๐ณ๐ณ๐ป๐ฒ๐๐ ๐ฏ๐ ๐ญ๐ฐ%, demonstrating its potential for ๐ต๐ถ๐ด๐ต-๐ฝ๐ฒ๐ฟ๐ณ๐ผ๐ฟ๐บ๐ฎ๐ป๐ฐ๐ฒ ๐๐ผ๐ผ๐ฑ ๐ฐ๐ผ๐บ๐ฝ๐ผ๐๐ถ๐๐ฒ๐.
๐ ๐ง๐ถ๐๐น๐ฒ: Microstructural engineering of maritime pine by microwave pretreatment and in situ polymerization with methyl methacrylate to improve composite structure and performance
๐ ๐๐ผ๐๐ฟ๐ป๐ฎ๐น: Journal of Materials Research and Technology
๐จโ๐ฌ Fernando Jรบnior Resende Mascarenhas, Rogรฉrio Manuel Santos Simรตes, Andrรฉ Luis Christoforo, Alfredo Manuel Pereira Geraldes Dias, Andrรฉ Eduardo Palos Cunha and Sergio Neves Monteiro.
๐ ๐๐ข๐: buff.ly/Ql1qdhn
#ISISE #ucoimbra #Dec #timberengineering #WoodComposites #MicrowaveTechnology #SustainableConstruction ... See MoreSee Less
0 CommentsComment on Facebook
๐ ๐ก๐๐ช ๐ฃ๐๐ฃ๐๐ฅ ๐
๐ณ Can microwave treatment improve wood durability without compromising its mechanical performance?
A new study published in ๐๐ป๐๐ฒ๐ฟ๐ป๐ฎ๐๐ถ๐ผ๐ป๐ฎ๐น ๐๐ถ๐ผ๐ฑ๐ฒ๐๐ฒ๐ฟ๐ถ๐ผ๐ฟ๐ฎ๐๐ถ๐ผ๐ป & ๐๐ถ๐ผ๐ฑ๐ฒ๐ด๐ฟ๐ฎ๐ฑ๐ฎ๐๐ถ๐ผ๐ป investigates the effects of ๐บ๐ถ๐ฐ๐ฟ๐ผ๐๐ฎ๐๐ฒ ๐๐ฟ๐ฒ๐ฎ๐๐บ๐ฒ๐ป๐ on the biological durability and mechanical properties of Eucalyptus globulus heartwood.
The results show that microwave pretreatment can significantly enhance ๐ฝ๐ฟ๐ฒ๐๐ฒ๐ฟ๐๐ฎ๐๐ถ๐๐ฒ ๐๐ฝ๐๐ฎ๐ธ๐ฒ ๐ฎ๐ป๐ฑ ๐ฟ๐ฒ๐๐ถ๐๐๐ฎ๐ป๐ฐ๐ฒ ๐๐ผ ๐ณ๐๐ป๐ด๐ฎ๐น ๐ฑ๐ฒ๐ฐ๐ฎ๐, while mild treatments preserve bending strength and stiffness, highlighting its potential for ๐๐๐๐๐ฎ๐ถ๐ป๐ฎ๐ฏ๐น๐ฒ ๐๐ถ๐บ๐ฏ๐ฒ๐ฟ ๐ฐ๐ผ๐ป๐๐๐ฟ๐๐ฐ๐๐ถ๐ผ๐ป.
๐ ๐ง๐ถ๐๐น๐ฒ: Influence of microwave treatment on fungal decay, preservative performance, and mechanical integrity of Eucalyptus globulus heartwood
๐ ๐๐ผ๐๐ฟ๐ป๐ฎ๐น: International Biodeterioration & Biodegradation
๐จโ๐ฌ Fernando Jรบnior Resende Mascarenhas, Juarez Benigno Paes, Alfredo Manuel Pereira Geraldes Dias, Andrรฉ Luis Christoforo, Rogรฉrio Manuel Santos Simรตes, Flรกvia Maria Silva Brito, Glaucileide Ferreira and Rodolpho Stephan Santos Braga.
๐ ๐๐ข๐: buff.ly/StTXLoT
#ISISE #UCoimbra #DEC #TimberEngineering #WoodDurability #MicrowaveTechnology #SustainableConstruction ... See MoreSee Less
0 CommentsComment on Facebook
๐ ๐๐ฆ๐๐ฆ๐ ๐ฎ๐ ๐ง๐ฒ๐ฐ๐ป๐ถ๐ฎ๐ฐ๐ฬ๐๐๐ถ๐ฐ๐ฎ ๐ฎ๐ฌ๐ฎ๐ฒ!
Researchers from the ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ ๐ฎ๐ป๐ฑ ๐ฉ๐ถ๐ฏ๐ฟ๐ฎ๐๐ถ๐ผ๐ป๐ ๐๐น๐๐๐๐ฒ๐ฟ of ๐๐ฆ๐๐ฆ๐ โ University of Coimbra participated in ๐ง๐ฒ๐ฐ๐ป๐ถ๐ฎ๐ฐ๐ฬ๐๐๐ถ๐ฐ๐ฎ ๐ฎ๐ฌ๐ฎ๐ฒ, held in Granada, Spain, from ๐ฎ๐ญ ๐๐ผ ๐ฎ๐ฏ ๐ข๐ฐ๐๐ผ๐ฏ๐ฒ๐ฟ.
The congress brought together researchers, professionals and industry representatives, providing an excellent opportunity to exchange knowledge and discuss recent advances in acoustics and vibrations.
๐ฌ ISISE researchers presented work covering a wide range of topics:
๐น ๐๐๐ถ๐น๐ฑ๐ถ๐ป๐ด ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ โ Acoustic performance of modular floors, impact sound mitigation, and optimisation of ventilation systems considering acoustic, energy and indoor air quality requirements.
๐น ๐๐ฐ๐ผ๐๐๐๐ถ๐ฐ ๐ ๐ฒ๐๐ฎ๐บ๐ฎ๐๐ฒ๐ฟ๐ถ๐ฎ๐น๐ โ Development and numerical modelling of acoustic metamaterials, resonant metastructures and Helmholtz resonators.
๐น ๐ฆ๐ผ๐๐ป๐ฑ๐๐ฐ๐ฎ๐ฝ๐ฒ๐ โ Soundscape analysis and its integration into conservation planning for natural areas and heritage sites.
๐น ๐ฉ๐ถ๐ฏ๐ฟ๐ผ๐ฎ๐ฐ๐ผ๐๐๐๐ถ๐ฐ๐ โ Acoustic comfort in metro stations and prediction of railway traffic-induced vibrations.
๐ ISISE was well represented by Luis Godinho, Paulo Amado Mendes, Diogo Mateus, Andreia Pereira, Pedram Ayobi, Marco Ribera, Henrique Ferreira, Luciana Oliveira, Liliana Carvalho, Rocco Scarano and Dhanuskha Jayawardana.
Congratulations to all researchers for their contributions and for representing ISISE at this international scientific event!
#ISISE #ucoimbra #Dec #fctuc #AcousticsAndVibrations #tecniacustica2026 #buildingacoustics #acousticmetamaterials #soundscapes #vibroacoustics #research ... See MoreSee Less
0 CommentsComment on Facebook
๐น ๐๐๐๐๐-๐๐ ๐๐ญ ๐๐ฅ๐๐ฌ๐ฌ๐ญ๐๐ ๐๐๐๐
Researchers Rohola Rahnavard, Sandra Jordรฃo and Eliana Inca Cabrera, attended glasstec โ International Trade Fair 2026 in Dรผsseldorf, Germany, one of the leading international events for the #glassindustry.
๐๏ธ The participation in #glasstec2026 provided an opportunity to explore the latest developments in #structuralglass, #facade ๐ฌ๐ฒ๐ฌ๐ญ๐๐ฆ๐ฌ, ๐ ๐ฅ๐๐ฌ๐ฌ ๐ฉ๐ซ๐จ๐๐ฎ๐๐ญ๐ข๐จ๐ง ๐๐ง๐ ๐ฉ๐ซ๐จ๐๐๐ฌ๐ฌ๐ข๐ง๐ ๐ญ๐๐๐ก๐ง๐จ๐ฅ๐จ๐ ๐ข๐๐ฌ, while engaging directly with manufacturers, engineering companies, testing organisations and other stakeholders from across the international glass and faรงade sector ๐ค to strengthen links between research and industry and exchange perspectives on current engineering challenges in structural glass and faรงade engineering.
#ISISE #SMCT #ucoimbra #Dec #fctuc #glasstec2026 #structuralglass #GlassEngineering #facadeengineering #buildingenvelope #GlassTechnology #research #innovation #TechnologyTransfer ... See MoreSee Less
0 CommentsComment on Facebook
๐จ ๐๐๐ฐ ๐ฉ๐๐ฉ๐๐ซ ๐ฉ๐ฎ๐๐ฅ๐ข๐ฌ๐ก๐๐!
โ๏ธ This study investigates the ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐จ๐ฉ๐ญ๐ข๐ฆ๐ข๐ฌ๐๐ญ๐ข๐จ๐ง of ๐๐จ๐ฅ๐-๐๐จ๐ซ๐ฆ๐๐ ๐ฌ๐ญ๐๐๐ฅ ๐ญ๐ซ๐ฎ๐ฌ๐ฌ-๐ ๐ข๐ซ๐๐๐ซ๐ฌ developed within the ๐๐๐๐๐๐๐๐๐๐๐๐ modular construction system. By refining the truss geometry and connection details, the research explores solutions to improve ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐, ๐ฆ๐๐ญ๐๐ซ๐ข๐๐ฅ ๐๐๐๐ข๐๐ข๐๐ง๐๐ฒ ๐๐ง๐ ๐๐๐๐ซ๐ข๐๐๐ญ๐ข๐จ๐ง ๐ฌ๐ข๐ฆ๐ฉ๐ฅ๐ข๐๐ข๐ญ๐ฒ. Numerical analyses and comparisons with conventional IPE beams demonstrate the potential of the optimised configurations for developing ๐ฅ๐ข๐ ๐ก๐ญ๐ฐ๐๐ข๐ ๐ก๐ญ ๐๐ง๐ ๐๐๐๐ข๐๐ข๐๐ง๐ญ ๐ฆ๐จ๐๐ฎ๐ฅ๐๐ซ ๐ฌ๐ญ๐๐๐ฅ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฌ.
๐ Design and structural performance optimization of a lipped-channel cold-formed steel truss-girder used in INNO3DJOINTS modular construction system
๐จโ๐ฌ Authors: Nemanja Milovanoviฤ, Rui Simรตes and Luรญs Simรตes da Silva
๐ Structures
๐ buff.ly/IPHdjBb
#ISISE #SMCT #ucoimbra #Dec #fctuc #inno3djoints #RFCS #ModularConstruction #coldformedsteel #steelstructures #StructuralOptimization #trussgirders #finiteelementanalysis #structuralengineering #research #innovation ... See MoreSee Less
0 CommentsComment on Facebook
๐ Call for Expressions of Interest | MODULINK Research Opportunity
We are looking for a motivated researcher with an MSc degree in Civil Engineering, Structural Engineering, or a related field to potentially join MODULINK โ Advanced Inter-Module Connections for High-Performance and Reconfigurable Steel Modular Buildings.
MODULINK is a research project focused on the development of a new generation of adjustable and reversible inter-module connections for steel modular construction, aiming to improve structural performance while facilitating manufacturing, assembly, accommodation of construction tolerances, future disassembly and reuse.
The research will combine several complementary areas, including:
โข development and optimisation of steel inter-module connection systems;
โข experimental testing and mechanical characterisation of connections;
โข detailed numerical/finite element modelling and model calibration;
โข development of simplified connection models for use in global structural analyses;
โข assessment of diaphragm behaviour and global structural response of modular buildings;
โข evaluation of floor vibration serviceability and structural dynamics;
โข development of practical recommendations for design, manufacturing, assembly and disassembly.
We are particularly interested in candidates with a strong interest in steel structures, computational mechanics, finite element modelling and/or experimental structural engineering. Previous experience in all these areas is not required.
The opportunity may be particularly suitable for someone interested in developing the research towards a PhD. Such an interest would be highly valued.
๐ฉ Interested in joining MODULINK?
Please submit your expression of interest through the following form: buff.ly/t0sA3N5
Please submit your interest before November 6th, 2026.
Please feel free to share this opportunity with MSc graduates or young researchers who may be interested.
#modulink #ResearchOpportunity #structuralengineering #civilengineering #steelstructures #ModularConstruction #finiteelementanalysis #experimentalmechanics #PhDOpportunity #research #engineering ... See MoreSee Less
Call for Interested Parties – MODULINK
buff.ly
As part of the R&D project โ MODULINK โ Advanced Inter-Module Connections for High-Performance and Reconfigurable Steel Modular Buildingsโ, the recruitment of one (1) research grant is planned t...0 CommentsComment on Facebook
๐ ๐๐ถ๐ฐ๐ธ-๐ผ๐ณ๐ณ ๐ผ๐ณ ๐๐ต๐ฒ ๐๐๐ฟ๐ผ๐ฝ๐ฒ๐ฎ๐ป ๐ฆ๐ง๐๐ฅ๐ฉ๐๐ฉ๐ ๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐!
On ๐ณโ๐ด ๐ข๐ฐ๐๐ผ๐ฏ๐ฒ๐ฟ ๐ฎ๐ฌ๐ฎ๐ฒ, the kick-off meeting of the European research project ๐ฆ๐ง๐๐ฅ๐ฉ๐๐ฉ๐ โ Enhancing the Fatigue Life of Advanced High-Strength Steel and Hybrid Structures through Friction Stir Welding took place at the University of Stuttgart, Germany.
Funded by the European Union under the ๐ฅ๐ฒ๐๐ฒ๐ฎ๐ฟ๐ฐ๐ต ๐๐๐ป๐ฑ ๐ณ๐ผ๐ฟ ๐๐ผ๐ฎ๐น ๐ฎ๐ป๐ฑ ๐ฆ๐๐ฒ๐ฒ๐น (๐ฅ๐๐๐ฆ), STIRVIVE aims to advance ๐๐ฟ๐ถ๐ฐ๐๐ถ๐ผ๐ป ๐ฆ๐๐ถ๐ฟ ๐ช๐ฒ๐น๐ฑ๐ถ๐ป๐ด (๐๐ฆ๐ช) technologies to improve the fatigue performance, durability and sustainability of high-strength steel structures and hybrid aluminiumโsteel joints.
Over the next ๐ฐ๐ฎ ๐บ๐ผ๐ป๐๐ต๐, the project will focus on developing advanced welding tools and processes, improving the fatigue resistance of welded joints, and enabling the industrial application of FSW technologies in sectors such as steel construction, shipbuilding and heavy engineering.
๐ฌ The ๐จ๐ป๐ถ๐๐ฒ๐ฟ๐๐ถ๐๐ ๐ผ๐ณ ๐๐ผ๐ถ๐บ๐ฏ๐ฟ๐ฎ, through researchers from ๐๐ฆ๐๐ฆ๐ โ Institute for Sustainability and Innovation in Structural Engineering, plays an active role in the project, leading research activities related to ๐ฎ๐ฑ๐๐ฎ๐ป๐ฐ๐ฒ๐ฑ ๐๐ฆ๐ช ๐๐ผ๐ผ๐น๐ถ๐ป๐ด, ๐ฒ๐ ๐ฝ๐ฒ๐ฟ๐ถ๐บ๐ฒ๐ป๐๐ฎ๐น ๐ณ๐ฎ๐๐ถ๐ด๐๐ฒ ๐ฐ๐ต๐ฎ๐ฟ๐ฎ๐ฐ๐๐ฒ๐ฟ๐ถ๐๐ฎ๐๐ถ๐ผ๐ป ๐ฎ๐ป๐ฑ ๐๐๐๐๐ฎ๐ถ๐ป๐ฎ๐ฏ๐ถ๐น๐ถ๐๐ ๐ฎ๐๐๐ฒ๐๐๐บ๐ฒ๐ป๐, in collaboration with researchers from ๐๐๐ ๐ ๐ฃ๐ฅ๐.
The STIRVIVE consortium brings together ๐ณ๐ผ๐๐ฟ ๐๐๐ฟ๐ผ๐ฝ๐ฒ๐ฎ๐ป ๐ฝ๐ฎ๐ฟ๐๐ป๐ฒ๐ฟ๐: University of Stuttgart (Germany), University of Coimbra (Portugal), SEAPOWER (Portugal) and TRA-C (France), combining scientific expertise and industrial capabilities to develop innovative and more sustainable joining solutions.
We look forward to contributing to this exciting European collaboration and advancing the next generation of high-performance steel and hybrid structures!
๐ฆ๐ง๐๐ฅ๐ฉ๐๐ฉ๐ (Grant Agreement No. 101296125) is co-funded by the European Union through the Research Fund for Coal and Steel (RFCS).
#stirvive #ISISE #UniversityOfCoimbra #RFCS #EuropeanResearch #frictionstirwelding #steelstructures #fatigue #structuralengineering #SustainableConstruction ... See MoreSee Less
0 CommentsComment on Facebook
The School of Engineering regularly welcomes leading international professors and researchers, bringing fresh ideas, experiences, and perspectives. As part of these visits, โEngineering Talksโ are promoted and open to the community, creating unique opportunities to engage with cutting-edge knowledge and international networks.
NEXT TALK:
Narges Azadvar
Marie Skลodowska-Curie Postdoctoral Fellow, School of Mechanical, Aerospace and Civil Engineering, University of Sheffield (UK)
19 October 2026, 11h00
Azurรฉm Campus, Building 1 | Room 2.009 (Sala de Reuniรตes 1 DEC)
Title: Composite Strengthening of Existing Structures: From FRP and TRM Seismic Retrofitting to Low-Carbon Textile-Mortar Systems
Info: Strengthening and rehabilitation of existing structures are increasingly important for improving seismic resilience and extending the service life of the built environment. This seminar traces a research journey from conventional fibre-reinforced polymer (FRP) systems to textile-reinforced mortar/concrete (TRM/TRC) and, more recently, low-carbon inorganic-matrix composites. It covers experimental and numerical studies on FRP- and TRC-strengthened reinforced-concrete columns under axial and cyclic loading, and on TRM-strengthened masonry walls under combined seismic actions. The final part introduces the ongoing Marie Skลodowska-Curie project STRENGTH (University of Sheffield), which is developing AR-glass textile-reinforced geopolymer mortar as a low-carbon strengthening solution, with a focus on textile-mortar bond behaviour and interface modelling. The session closes with open technical questions and opportunities for collaboration.
Dr Narges Azadvar is a Marie Skลodowska-Curie Postdoctoral Fellow at the University of Sheffield, specialising in advanced composite systems and low-carbon materials for structural strengthening. She holds a PhD in Structural Engineering (2021) and has worked on more than 20 academic and industry-supported projects in structural rehabilitation, cementitious composites and finite-element modelling. She has published on FRP/TRC-strengthened concrete columns and TRM-strengthened masonry walls, co-authored two book chapters and developed a patented strengthening system. Her current MSCA project, STRENGTH, focuses on AR-glass textile-reinforced geopolymer mortar for low-carbon strengthening of substandard structures.
Organiser/Promoter: Pier Giovanni Benzo, investigador de pรณs-doutoramento (projeto CirWind, coord. Prof. Josรฉ Sena-Cruz), Departamento de Engenharia Civil
Partnership: Departamento de Engenharia Civil / ISISE-Institute for Sustainability and Innovation in Structural Engineering ... See MoreSee Less
0 CommentsComment on Facebook
โ๏ธ Predicting ๐ฆ๐๐๐ก๐๐ง๐ข๐๐๐ฅ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐ as a component is built.
A new study in ๐๐ก๐ข๐ง-๐๐๐ฅ๐ฅ๐๐ ๐๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฌ links ๐๐จ๐จ๐ฅ๐ข๐ง๐ ๐ก๐ข๐ฌ๐ญ๐จ๐ซ๐ฒ to ๐ฌ๐ญ๐ซ๐๐ฌ๐ฌโ๐ฌ๐ญ๐ซ๐๐ข๐ง ๐๐๐ก๐๐ฏ๐ข๐จ๐ฎ๐ซ and ๐ฌ๐ฉ๐๐ญ๐ข๐๐ฅ ๐ฏ๐๐ซ๐ข๐๐ญ๐ข๐จ๐ง๐ฌ in mechanical properties within ๐๐๐-๐๐ซ๐ ๐๐๐ซ๐๐จ๐ง ๐ฌ๐ญ๐๐๐ฅ ๐๐จ๐ฆ๐ฉ๐จ๐ง๐๐ง๐ญ๐ฌ.
๐ฅ The animation reveals the predicted ๐ฌ๐ญ๐ซ๐๐ง๐ ๐ญ๐ก ๐๐ข๐ฌ๐ญ๐ซ๐ข๐๐ฎ๐ญ๐ข๐จ๐ง throughout the volume, connecting ๐๐๐ฉ๐จ๐ฌ๐ข๐ญ๐ข๐จ๐ง ๐ฌ๐ญ๐ซ๐๐ญ๐๐ ๐ฒ with ๐๐จ๐ฆ๐ฉ๐จ๐ง๐๐ง๐ญ ๐ฉ๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐.
๐ buff.ly/TSHJPw0
๐ buff.ly/dihwxMM
#ISISE #SMCT #dad #UC #fctuc #iamfat #eu #RFCS #dedarc #WAAM #additivemanufacturing ... See MoreSee Less
0 CommentsComment on Facebook
๐ฌ ISISE at the European Researchersโ Night 2026!
Last September, ISISE took part in the European Researchersโ Night โ Noite Europeia dos Investigadores 2026, held at Forum Braga.
It was a great opportunity to bring research closer to the public and, in particular, to younger audiences, through interactive demonstrations, hands-on activities and conversations with our researchers.
Visitors had the chance to discover some of the work being developed at ISISE in areas related to structural engineering, sustainability, digital technologies, innovative materials and the built environment, showing how research can contribute to safer, more sustainable and more resilient communities.
A big thank you to everyone from ISISE who contributed to preparing and running the activities, and to all those who stopped by, asked questions, experimented and shared their curiosity with us!
Events such as the European Researchersโ Night are an important opportunity to open the doors of research to society and inspire the next generation of scientists and engineers. ๐๐๏ธ๐ฌ
#ISISE #EuropeanResearchersNight #NEI2026 #ResearchersNight #ScienceCommunication #Research #Engineering #StructuralEngineering #Sustainability #Innovation #UMinho #Braga ... See MoreSee Less
0 CommentsComment on Facebook
๐ ๐๐๐๐๐ ๐๐ญ ๐ญ๐ก๐ ๐๐ฎ๐ซ๐จ๐ฉ๐๐๐ง ๐๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌโ ๐๐ข๐ ๐ก๐ญ ๐๐๐๐ ๐ข๐ง ๐๐จ๐ข๐ฆ๐๐ซ๐
On 25 September, ISISE participated in the ๐๐ฎ๐ซ๐จ๐ฉ๐๐๐ง ๐๐๐ฌ๐๐๐ซ๐๐ก๐๐ซ๐ฌโ ๐๐ข๐ ๐ก๐ญ ๐๐๐๐, held in downtown Coimbra, with the stand:
๐๏ธ ๐๐๐๐๐ ๐๐๐ โ ๐๐ฑ๐ฉ๐๐ซ๐ข๐ฆ๐๐ง๐ญ, ๐๐ฎ๐ข๐ฅ๐, ๐๐ซ๐๐ง๐ฌ๐๐จ๐ซ๐ฆ
Throughout the event, visitors had the opportunity to explore interactive activities and demonstrations related to the research developed at ISISE, including:
๐จ๏ธ ๐๐ซ๐ข๐ง๐ญ๐ข๐ง๐ ๐ญ๐ก๐ ๐๐ฎ๐ญ๐ฎ๐ซ๐ โ discovering how polymer and steel 3D printing can transform the manufacturing of materials and construction solutions.
๐ถ ๐๐ก๐ ๐๐๐ง๐๐ ๐จ๐ ๐ซ๐๐ฌ๐จ๐ง๐๐ง๐๐ โ exploring vibration, sound and science through fine granular material placed on a vibrating metal plate.
๐๏ธ ๐๐๐ข๐ฌ๐ฆ๐ข๐ ๐๐ก๐๐ฅ๐ฅ๐๐ง๐ ๐ โ building small structures with wooden sticks and marshmallows and testing their behaviour on a shake table.
โป๏ธ ๐๐ฎ๐ข๐ฅ๐โฆ ๐๐ ๐๐ข๐ง! โ showing how beams and columns can be reused to create new buildings, contributing to more sustainable construction, within the scope of the C4C project.
The stand also included educational videos and research projects developed at ISISE, bringing structural engineering, sustainability and innovation closer to the public.
A big thank you to everyone who visited our stand and to all ISISE members involved in preparing and supporting the activities throughout the event.
#ISISE #UCoimbra #DEC #FCTUC #EuropeanResearchersNight #NEI2026 #ScienceCommunication #StructuralEngineering #Sustainability #Innovation #3DPrinting #SeismicEngineering #CircularConstruction #Connect4C #Research ... See MoreSee Less
0 CommentsComment on Facebook
๐๏ธ ๐๐๐๐๐ ๐๐ญ ๐๐๐๐ ๐๐จ๐ง๐ ๐ซ๐๐ฌ๐ฌ ๐๐๐๐
Researchers from ๐๐๐๐๐ โ ๐๐ง๐ข๐ฏ๐๐ซ๐ฌ๐ข๐ญ๐ฒ ๐จ๐ ๐๐จ๐ข๐ฆ๐๐ซ๐ participated in the ๐๐๐๐ ๐๐จ๐ง๐ ๐ซ๐๐ฌ๐ฌ ๐๐๐๐, held in Zlatibor, Serbia, from 23 to 25 September.
The event provided an excellent platform for scientific exchange on recent advances in ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐๐ง๐ ๐ข๐ง๐๐๐ซ๐ข๐ง๐ , bringing together researchers, practitioners and industry representatives.
ISISE was represented through contributions by ๐ ๐ข๐ฅ๐ข๐ฉ ๐๐ฃ๐ฎ๐๐ข๐ง๐ค๐จ๐ฏ๐ขฤ, ๐๐๐๐ ๐๐๐ง๐ค๐จ๐ฏ๐ขฤ, ๐๐ฅ๐๐ค๐ฌ๐๐ง๐๐ซ๐ ๐๐ข๐ฆ๐จ๐ฏ๐ขฤ, ๐๐ฅ๐๐ค๐ฌ๐ ๐๐ข๐ฅ๐ขฤ๐๐ฏ๐ขฤ, ๐๐ฆ๐ข๐ง๐ ๐๐๐ฃ๐๐๐ซ๐๐ฏ๐ขฤ and ๐๐ฎรญ๐ฌ ๐๐ข๐ฆรต๐๐ฌ ๐๐ ๐๐ข๐ฅ๐ฏ๐, who delivered a keynote lecture on ๐ฌ๐ญ๐๐๐ฅ ๐๐จ๐ง๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ข๐จ๐ง, ๐ซ๐๐ฌ๐๐๐ซ๐๐ก ๐๐ง๐ ๐ข๐ง๐ง๐จ๐ฏ๐๐ญ๐ข๐จ๐ง ๐๐จ๐ซ ๐ ๐ฌ๐ฎ๐ฌ๐ญ๐๐ข๐ง๐๐๐ฅ๐ ๐๐ฎ๐ญ๐ฎ๐ซ๐.
The presented research addressed topics including ๐๐ข๐ซ๐๐ฎ๐ฅ๐๐ซ ๐๐จ๐ง๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ข๐จ๐ง, ๐ซ๐๐ฎ๐ฌ๐๐๐ฅ๐ ๐๐ง๐ ๐๐๐ฆ๐จ๐ฎ๐ง๐ญ๐๐๐ฅ๐ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐ฌ๐ฒ๐ฌ๐ญ๐๐ฆ๐ฌ, ๐ฌ๐ญ๐๐๐ฅ ๐ฃ๐จ๐ข๐ง๐ญ๐ฌ ๐๐ง๐ ๐๐จ๐ง๐ง๐๐๐ญ๐ข๐จ๐ง๐ฌ, and ๐ฆ๐๐๐ก๐ข๐ง๐ ๐ฅ๐๐๐ซ๐ง๐ข๐ง๐ ๐๐ฉ๐ฉ๐ซ๐จ๐๐๐ก๐๐ฌ ๐๐จ๐ซ ๐ฌ๐ญ๐ซ๐ฎ๐๐ญ๐ฎ๐ซ๐๐ฅ ๐๐๐ฌ๐ข๐ ๐ง.
#ISISE #SMCT #ucoimbra #Dec #fctuc #ases2026 #structuralengineering #steelstructures #circularconstruction #SteelConnections #reusablestructures #Demountablestructures #MachineLearning #SustainableConstruction #research ... See MoreSee Less
0 CommentsComment on Facebook